High-Performance Micro Static Eliminator

SJ-M series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Spot Type Main Unit SJ-M010

SJ-M010 - Spot Type Main Unit

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		SJ-M010
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec max.^*1
Ion balance		±15 V^*2
Air purge supplied pressure		0.001 to 0.5 MPa^*3
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +80 °C^4^5
	Relative humidity	35 to 65 % RH (No condensation)^*3
Weight		Approx. 600 g
^1 At installation distance 50 mm, air flow 60 Nl/min (ambient temperature 20 to 30 °C, relative humidity 40 to 60 %) ^2 At installation distance 50 mm, air flow 20 Nl/min (ambient temperature 20 to 30 °C, relative humidity 40 to 60 %) ^3 Contact KEYENCE for information about derating for humidity and pressure when the ambient temperature above 35 °C. Use clean, dry air with a dew point of -20 °C or less for the supplied fluid. Also, the minimum air flow amount varies according to the nozzle. Contact KEYENCE for information about each nozzle. ^4 Use a supplied fluid with a temperature of 40 °C or less. ^*5 Only for the pressure cable. Other parts should be used with an ambient temperature of 0 to 40 °C.