Ultra-small Digital Laser Sensor

LV-S series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Multi-Purpose Digital Laser Sensor - LV-N series

Amplifier Unit, Expansion Unit, NPN LV-12SA

LV-12SA - Amplifier Unit, Expansion Unit, NPN

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Specifications

Model			LV-12SA
Type			Expansion unit (1 line)
Main unit/Expansion unit
Applicable model			LV-S61/S41/S41L/S31/S71/S72
Control output			NPN open-collector × 2 channels, 40 VDC maximum, 100 mA or less per output
Response time	ExceptLV-S31	ULTRA	4 ms
		SUPER	2 ms
		TURBO	500 µs
		FINE	250 µs
		HSP	80 µs
	LV-S31standard mode		500 µs
	LV-S31standard mode	SPED2	2 ms
		SPED3	8 ms
		SPED4	32 ms
	LV-S31High-speed mode		250 µs
Control input			Light emission stop input, external calibration, set value bank selection input, or received light intensity shift input
Number of interference prevention units	ULTRA		4
	SUPER
	TURBO		2
	FINE
	HSP		0
Unit expansion			Up to 16 units (17 units total including the main unit)^*1
Rating	Power voltage		12 to 24 VDC, Ripple (P-P) 10 % or less, Class 2^*2
	Power consumption	Normal	1.5 W or less (62.5 mA or less at 24 V)
		Eco-Half Eco-All	1.35 W or less (57.3 mA or less at 24 V)
Environmental resistance	Ambient temperature		-10 to +55 °C (No freezing)^*3
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
Material	Main unit		Main body, cover: Polycarbonate
Weight			Approx. 80 g (including 2 m cable)
^1 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is ^2 When more than 8 units connected, be sure to use supply voltage 24 VDC Ripple (P-P) 10 % max. ^*3 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient temperature range varies as follows: 1 to 2 units connected: -10 to +55 °C, 3 to 10 units connected: -10 to +50 °C, 11 to 16 units connected: -10 to +45 °C

Data Sheet (PDF) Other Models