Separate Amplifier Type Pressure Sensor

AP-40 series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Amplifier Unit PNP AP-40P

AP-40P - Amplifier Unit PNP

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		AP-40P
Type		Main unit, PNP
Applicable sensor head		AP-41, AP-43, AP-44
Rated pressure		-15% to +110% of F.S.
Display		3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm), Display cycle: 5 times/sec.
Display resolution		AP-41: 0.1 kPa, 1 mmHg, 0.1 inchHg, 0.001 bar AP-43: 0.001 MPa, 0.01 kgf/cm², 0.2 Psi, 0.01 bar AP-44: 0.2 kPa, 2 mmHg, 0.1 inchHg, 0.002 bar
Display temperature characteristic		±1.0 % max. of F.S.
Temperature fluctuation for analogue output		±2.0 % max. of F.S.
Mounting		Mounting With supplied mounting bracket (2 types) or optional panel mounting bracket^*1
Response time (Chattering prevention function)		2.5/5/100/500 ms
I/O	Control output	PNP: 100 mA max. (30 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C. selectable)
	Analogue voltage output	1 to 5 V
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple 10 % or less
	Current consumption	105 mA (12 V), 55 mA (24 V) (including sensor head)
Environmental resistance	Ambient temperature	0 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
	Shock resistance	100 m/s², 3 times in each of X, Y and Z axis
Material		Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Cable: Oil-proof cabtyre cable
Weight		80 g (including 2 m cable) (28 g without cable)
^*1 Two types of panel mounting brackets are available: OP-31357 (black) and OP-32908 (grey).