Two-colour Digital Display Pressure Sensor

AP-30 series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Main Unit, Positive-pressure Type, 1 Mpa, NPN AP-33Z

AP-33Z - Main Unit, Positive-pressure Type, 1 Mpa, NPN

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		AP-33Z
Type		Positive pressure, Zero shift, NPN
Rated pressure		0 to 1.000 MPa
Fluid type		Air or non-corrosive gases
Type of pressure		Gauge pressure
Display		3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm)
Display resolution		0.01 bar, 0.2 Psi, 0.001 MPa, 0.01 kgf/cm²
Detectable pressure range		-15 to +110 % of F.S.
Response time (Chattering prevention function)		2.5/5/100/500 ms (selectable)
I/O	Zero-shift input	No-voltage input (with contacts, without contacts), input time: 20 ms or more
	Control output	NPN open collector: 100 mA max. (40 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable)
Rating	Power voltage	12 to 24 VDC ±10 % or less, Ripple (P-P) 10 % or less
	Current consumption	50 mA (at 24 V) or less, 90 mA (at 12 V) or less
Environmental resistance	Pressure resistance	14.7 bar (1.47 MPa)
	Ambient temperature	0 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material		Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable
Weight		Approx. 120 g