Laser scan micrometer

LS-3000 series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

LS-3033 Specially Ordered LS-3033SO(8073)

LS-3033SO(8073) - LS-3033 Specially Ordered

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		LS-3033SO(8073)
Type		Fine measuring
Applicable controller		LS-3100/LS-3100D
Scanning head type		Separate
Measurement range		0.08 to 30 mm^*1
Smallest detectable object		0.08 mm
Transmitter/receiver distance		120 mm (Fixed)^*2
Repeatability		±0.3 µm (number of averaging measurements: 512)
Measurement accuracy		±2 µm max.^*3
Laser scan rate		400 scans/s
Laser scan velocity		63 m/s
Laser scan range		Approx. 33 mm
Display	Minimum display unit	0.1 µm
Terminal block I/O	Analogue voltage	±6 V, Output impedance: 0 Ω
	Control output	Relay output: 3PST-NO contact, 250 VAC, 2 A (resistive load)
	Control input	Hold synchronous, LASER REMOTE, PROGRAM SELECT (Program Nos. 1 to 5) Non-voltage input (contact/solid state)
Light source		Invisible infrared semiconductor laser Output: 3.0 mW (FDA) /55 µW (IEC), Wavelength: 780 nm, Pulse duration: 111 µs Laser Class: Class I Laser Product (FDA (CDRH) Part 1040.10), Class 1 Laser Product (IEC 60825-1)
Interface	RS-232C	Optional
	GP-IB
	BCD
Rating	Power voltage	85 to 264 VAC, 50/60 Hz
	Power consumption	40 VA max.
Environmental resistance	Ambient temperature	0 to +45 °C
	Relative humidity	35 to 85 % RH (No condensation)
Weight		T: 0.5 kg, R: 0.4 kg
^1 When the outer diameter is measured. ^2 'T' indicates a transmitter, 'R' indicates a receiver. ^*3 When a rod 10 mm in diameter is measured in a 2 x 20 mm, 4 x 20 mm, or 10 x 20 mm measuring area.