Touch Panel Display
VT3 series
Recommended Replaceable Products: 15" TFT colour touch panel display - VT5-X15
Contact Us: 1-800-88-1358 Enquiry form
15-inch XGA TFT Colour Touch Panel VT3-X15
*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.
Specifications
Model | VT3-X15 | |||
General specifications | Current consumption | - | ||
Power consumption | 110VA or less | |||
Structure | Panel built-in type, IP65f equivalent dust-proof, waterjet-proof on only front panel | |||
Overvoltage category | II | |||
Pollution degree | 2 | |||
Power voltage | 100 to 240 VAC±10% (50/60 Hz) | |||
Noise resistance | 1500 Vp-p pulse width 1 µs (common mode, based on noise simulator) | |||
Withstand voltage | 1500 VAC 1 minute (between power terminal and housing) | |||
Insulation resistance | 50 MΩ or more tested by 500 VDC megohmmeter (between power terminal and housing) | |||
Vibration resistance | Intermittent vibration | Frequency: 5 to 9 Hz | Half amplitude: 3.5 mm*1 | |
Frequency: 9 to 150 Hz | Acceleration: 9.8 m/s2*1 | |||
Continuous vibration | Frequency: 5 to 9 Hz | Half amplitude: 1.75 mm*1 | ||
Frequency: 9 to 150 Hz | Acceleration: 4.9 m/s2 *1 | |||
Ground | Class D grounding | |||
Operating environment | Minimal amount of dust and corrosive gas present | |||
Ambient operating temperature | 0 to +50°C | |||
Ambient operating humidity | 35 to 85%RH (No condensation)*2 | |||
Ambient storage temperature | -10 to +60°C (No freezing) | |||
Ambient storage humidity | 35 to 85%RH (No condensation)*2 | |||
Weight | Approx 4750 g | |||
Performance specifications | Displaypanel | Display elements | TFT colour LCD | |
Display colour | 32768 colours | |||
Number of points displayed | W 1024 × H 768 points | |||
Active display area | W 304.1 × H 228.1 mm | |||
Service life (normal temperature andhumidity) | Approx 50000 h | |||
Backlightlamp | System | White LED (Not replaceable)*3 | ||
Life-span | Approx 50000 h | |||
Touchswitch | Number of switches | 64×48/screen | ||
System | Analogue resistive membrane type | |||
Operating force | 1.96N or less | |||
Life-span | 1,000,000 times or more | |||
Screen data internal memory | Memory capacity | 28 MB (44 MB expansible) | ||
Number of pages that can be registered | Up to 1024 pages | |||
Number of screens that can be registered | Up to 1024 screens | |||
Page No.: 0 to 8999, Global window No.: G000 to G999, Report screen P.00 to P.15 | ||||
Data backup | Screen data | Flash ROM can be erased 100000 times | ||
Recording data | SRAM backup:lithium battery | |||
Character font | Outline font, Bitmap font, Stroke font Windows font, IMAGE font, Small font | |||
Calendar timer | Accuracy: ±40s/month (25°C), Backup:lithium battery (5 years above of service life at 25°C) | |||
Communication function | PLC host link | KEYENCE, Mitsubishi Electric, OMRON, Sharp, Fuji Electric FA Components & Systems, Yaskawa Electric, Hitachi, Panasonic Electric Works, JTEKT (Toyota), | ||
Thermostat | Yokogawa Electric, Azbil (Yamatake), OMRON, RKC Instrument, Shinko Technos, CHINO | |||
Inverter | Mitsubishi Electric, Fuji Electric FA Components & Systems, Yaskawa Electric, OMRON | |||
Servo amplifier | Mitsubishi Electric | |||
Stepping motor | Oriental Motor | |||
Robot controller | IAI | |||
Eco-power meter | Panasonic Electric Works | |||
General-purpose communication | Based on specific commands | |||
I/O specifications | Serial I/F (PORT 1: SERIAL) for connecting PCs | Applied standard | Conforms to EIA RS-232C | |
Synchronisation between the transmitter and receiver | Start-stop, full duplex | |||
Communication distance | 15m | |||
Data length | 7 or 8 bits | |||
Parity | Even, odd, none | |||
Communication speed | 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps | |||
Serial I/F (PORT 2) for connecting PLC/external devices | Applied standard | Conforms to EIA RS-232C and RS-422A | ||
Synchronisation between the transmitter and receiver | Start-stop, full duplex | |||
Communication distance | 15m (RS-232C)/500m (RS-422A) | |||
Data length | 7 or 8 bits | |||
Parity | Even, odd, none | |||
Communication speed | 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps | |||
Serial I/F (PORT 3) for connecting barcode/PLC/external devices | Applied standard | Conforms to EIA RS-232C*4 | ||
Synchronisation between the transmitter and receiver | Start-stop, full duplex | |||
Communication distance | 15 m*5 | |||
Data length | 7 or 8 bits | |||
Parity | Even, odd, none | |||
Communication speed | 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps | |||
Serial I/F (PORT 4) for connecting MegaLink/multi-link/KL-link/external devices | When connected through MegaLink | Applied standard | RS-485 | |
Synchronisation between the transmitter and receiver | Start-stop, half duplex | |||
Communication speed | 19,200 bps, 115,200 bps, 0.5 Mbps, 1 Mbps, 2 Mbps | |||
Cable connection | Multi-drop (branching is not possible) | |||
Maximum number of connectable units | 15 | |||
Baud rate 19200 | Maximum extension distance: 1,000 m | |||
Baud rate 115200 | ||||
Baud rate 0.5 M | Maximum extension distance: 500 m | |||
Baud rate 1 M | Maximum extension distance: 200 m | |||
Baud rate 2 M | Maximum extension distance: 100 m | |||
When connected through VT2 multi-link | Applied standard | RS-485 | ||
Synchronisation between the transmitter and receiver | Start-stop, half duplex | |||
Communication distance | Maximum extension distance: 500 m or less | |||
Communication speed | 19200, 115200, 0.5M, 1M bit/s | |||
Baud rate 115200 or less | Maximum extension distance: 500 m | |||
Baud rate 0.5 M | Maximum extension distance: 100 m | |||
Baud rate 1 M | Maximum extension distance: 50 m | |||
When connected through multi-link | Applied standard | RS-485 | ||
Synchronisation between the transmitter and receiver | Start-stop, half duplex | |||
Communication distance | Maximum extension distance: 500 m or less | |||
Communication speed | 19200, 38400, 57600, 115200 bit/s | |||
When linked with the KL | Sign system | f, f/2 encoding | ||
Control method | Autonomous distributed token bus control | |||
Cable connection | T-shaped branch, multi-drop | |||
Communication speed | 5 Mbps, 2.5 Mbps, 625 kbps, 156 kbps | |||
Communication media | Dedicated cable KPEV-SB (1 pc; 2-core shielded twisted pair cable [stranded wire]) * Conductor section area: 0.5 to 1.25 mm2 | |||
Maximum number of connectable units | 129 units (including the master station, not including the KL-T1) | |||
Error control | Vertical parity, checksum, double sampling, burst noise detection | |||
Baud rate 5 Mbit/s: Maximum base length | 50 m | |||
Baud rate 5 Mbit/s: Maximum branch wire length | 20 m | |||
Baud rate 2.5 Mbit/s: Maximum base length | 120 m | |||
Baud rate 2.5 Mbit/s: Maximum branch wire length | 40 m | |||
Baud rate 625 kbit/s: Maximum base length | 500 m | |||
Baud rate 625 kbit/s: Maximum branch wire length | 150 m | |||
Baud rate 156 kbit/s: Maximum base length | 1200 m | |||
Baud rate 156 kbit/s: Maximum branch wire length | 350 m | |||
Communication cable conductor section area 0.5 mm2 | Maximum extension distance: 1,000 m | |||
Communication cable conductor section area 0.75 mm2 | Maximum extension distance: 1,200 m | |||
Communication cable conductor section area 0.9 mm2 | ||||
Communication cable conductor section area 1.25 mm2 | ||||
*1 Conforms to JIS B 3502, IEC61131-2 |